How do you flip a Onshape?

However, if 15 degrees is not precise enough, you can hold down the “Shift” key while clicking on the arrows. This will rotate the model in 5-degree increments, giving you much more control.

Can you flip a sketch in Onshape?

You have the ability to use the Mirror tool in either of two ways: Select the tool and then the mirror line and the entities. Pre-select the mirror line, then select the tool, then select the entities to mirror.

How do you mirror an Onshape Assembly?

To create mirrored geometry in an assembly you can do the following:

  1. Right click on the origin of the assembly and click “Create Part Studio in context”, then click the green check box. …
  2. Create a Plane in this new part studio that you would like to mirror across.

How do you invert Onshape?

Best Answer

  1. Create a mid plane between the top and the bottom, sketch the desired rotation axis, and rotate 180 degrees.
  2. Create mate connectors on the top and bottom of the part and used “Transform by mate connectors”

How do you drag a sketch Onshape?

Transform Sketch

  1. Click .
  2. Select the sketch entities you want to move.
  3. Use the manipulator to drag and orient the sketch.
  4. Click in space when the sketch is placed and oriented as desired.
IT IS INTERESTING:  Quick Answer: Can AutoCAD read Gerber files?

How do you move Onshape?

View navigation

  1. 3D Rotate: Right-mouse-button-click+drag.
  2. Zoom in and out: Pinch out and pinch in, respectively.
  3. 2D pan: CTRL-right-mouse-button+drag.

How do you use the triad manipulator on Onshape?

Manipulator drag – tap on the part to activate the triad manipulator, then touch and drag the triad manipulator to use it.

  1. Reposition the manipulator itself. …
  2. Move the instance along an axis. …
  3. Move the instance within the plane. …
  4. Rotate the instance around the triad X, Y, or Z axis.

How do you align sketches on Onshape?

Aligning callouts is simple. Left-click each of the callouts that you want to align, then right-click and choose the option to “align horizontally” or “align vertically.”

How do I move my origin on Onshape?

Answers

  1. Start a transform feature.
  2. In the transform feature, select the part or parts you want to move to the origin. In my case, I only have 1 part.
  3. Make sure the type is “Translate by line” and in the selection box for “Line or points” first select the point you want docked to the origin.
  4. Next, select the origin.

How do you use the transform tool on Onshape?

Transform

  1. Click .
  2. Select a part (and its Mate connector or axis, if desired) to move.
  3. Select the method of moving the part (transform type): Translate by line – Move the part along a selected line: such as a part edge. …
  4. Click .