If you see a square with HWT or a circle with HW or WH in the middle, those are the hot water tank (HWT) and the hot water heater (HW or WH). You may find these symbols in an interior or exterior storage space, or perhaps in a closet inside the apartment.
What are the various symbols in a floor plan?
Here are the six most common types of symbols you will find on floor plans (versus other types of plans).
- Compass. The north arrow tells you about the orientation of the property. …
- Stairs. Stairs are customarily indicated by parallel lines with their measurements. …
- Doors. …
- Windows. …
- Walls. …
What does HP mean floor plan?
Hp is the height of the window sill, i.e. the distance from the finished floor to the edge of the wall opening under the window sill. In our case, the window sill was designed at a height of 85 cm above floor level.
Why are symbols used on the floor plan?
These symbols are used to represent key elements like windows, doors, and structural walls, as well as building materials, furniture, and appliances. Done right, floor plans quickly communicate the basic layout of the property, how it’s oriented, and how the different rooms and structural elements work together.
Why are symbols used on drawings and plans?
Symbols are used on electrical drawings to simplify the drafting work for both the drafters and the workers interpreting the drawings. It should be noted that electrical symbols are not standardized throughout the industry, which is one reason why electrical drawings typically have a symbol legend or list.
What does P mean in house plans?
DBL = double ovens (typically seen in larger than average kitchens) P, PAN or PANTRY = Pantry. Depending on the plan, the pantry could be as small as the refrigerator or as large as a luxury walk-in closet.
When the metric system is used dimensions are written in?
When the metric system is used, dimensions are written in: Meters, centimeters, and millimeters. If the scale on a site plan reads SCALE: 1inch = 20′-0″, then every: Inch on the drawing represents 20 feet, 0 inches.
How do you read a kitchen floor plan?
For instance, on a kitchen floor plan, you will typically see a base cabinet labeled SB36, B30, 3DB24, and W2442. What the nomenclature above means: SB36 = SB stands for Sink Base and 36 means the cabinet is 36” wide. B30 = B stands for Base and 30 means the cabinet is 30” wide.
How do you read floor plan scales?
The scale for floor plans can be shown in two different ways:
- As equivalent measurements, eg 1/8″ = 1′ or 1cm = 1m, “an eighth of an inch represents 1 foot” or “1cm represents 1m”
- As a ratio eg 1:96 or 1:100, “one to forty eight” or “one to one hundred”
What does sh mean on a floor plan?
SH or DH means single- or double-hung window, operable by either the bottom panel or both the top and bottom for a double-hung window.