Where is the project tool in Fusion 360?

How do I open a project in Fusion 360?

To open a file saved locally on your computer, click Open from my computer.

  1. Navigate to the file and then click Open. …
  2. As soon as the file has completed Cloud translation, click the “Open” button in the Job Status window, to launch the file in Fusion 360.

What is a project sketch?

Project a sketch—Creates a sketch or copies an existing sketch into the model to project. • Project a cosmetic sketch—Creates a cosmetic sketch or copies an existing cosmetic sketch into the model to project. To access the Project tool, click Model > Project.

How do you project Sketch in fusion?

Design > Sketch > Create > Project/Include > Project

In the Design workspace, Sketch contextual tab, select Create > Project/Include > Project. Select a plane or planar face on which you want to place your projection. Select all the objects you want to project. Click OK or press Enter.

How do I project a Sketch onto a plane?

Click Project Curve on the Curves toolbar, or Insert > Curve > Projected. Use this selection to project a sketched curve onto a model face. Under Sketch to Project , select the curve in the graphics area or from the flyout FeatureManager design tree.

IT IS INTERESTING:  How do I get rid of Autodesk?

How do you project Sketch geometry in Fusion 360?

Project Geometry

  1. In a 2D sketch, click a face or work plane to set the sketch plane.
  2. Click Sketch tab Create panel Project Geometry .
  3. In the graphics window, click the geometry that you want to project onto the sketch plane. …
  4. To finish, right-click and choose Done, press Esc, or click another command.

Where is mesh to BRep?

Mesh to BRep is only available in Direct Modeling Mode. To enter direct modeling mode, right-click on the Fusion 360 Browser > select “Do Not Capture Design History.” A warning dialog will appear.

Can I open an STL file in Fusion 360?

There are a couple of different ways of importing an STL file into Fusion 360. … Create a new design or open a design that’s in progress (you can add an STL model to an existing design). Click “Insert” on the toolbar and select “Insert Mesh” from the menu. Select the STL file and click “Open”.

What are the tools in Fusion 360?

Using Specialty Profile Tools

Tool Name Fusion 360 Name
Engraving Cutter – Tipped Off & Pointed Chamfer Mill
Keyseat Cutter Slot Mill
Runner Cutter Tapered Mill
Undercutting End Mill Lollipop Mill

What tools does Fusion 360 have?

A wide variety of solid round carbide, HSS and cobalt cutting tools. Featuring end mills, drills, taps, reamers, thread mills, micro tools and more.