Question: Why is part fixed in Solidworks assembly?

It is recommended that at least one assembly component is either fixed, or mated to the assembly planes or origin. This gives a frame of reference for all other mates, and helps prevent unexpected movement of components when mates are added. A fixed component has a (f) before its name in the FeatureManager design tree.

How do I change the fixed part in a Solidworks assembly?

To change the fix or float, go to featuremanager deign tree. Select and right click on the component’s name for changing the fix or float condition. Select fix or float from the appearing menu as per your requirement. This way you can fix component or float it in solidworks assemebly interface.

How do you lock a part in place in Solidworks assembly?

Now to lock any part in Solidworks assembly all you have to do is:

  1. choose the part from the FeatureManager Design tree.
  2. right click on the name of the part.
  3. Select Fix ( To fix the part), Float (To make the part move)

Can you edit parts in assembly solidworks?

To edit a part while in an assembly: Right-click the part and select Edit Part, or click Edit Component on the Assembly toolbar. The title bar shows the name of the part in the assembly that is open for editing as in .

IT IS INTERESTING:  How do I split a column wall in Revit?

What is temporary fix group in Solidworks?

You can temporarily fix or group components to affect their behavior when you drag to move or rotate components. To fix or group components: Click Temporary Fix/Group (Assembly toolbar).

How do you anchor a part in Solidworks?

To set the anchor points:

  1. Expand Sheet Format for the sheet in the FeatureManager design tree.
  2. Right-click one of the anchors, select Set Anchor, then click where you want the anchor point on the sheet. When you set the anchor point from the FeatureManager design tree, you are automatically in Edit Sheet Format mode.

What does the lock mate do in Solidworks?

A Lock mate maintains the position and orientation between two components. The components are fully constrained relative to each other. A Lock mate has the same effect as forming a subassembly between the two components and making the subassembly rigid.

How do I fix references in Solidworks?

Replacing Broken References

  1. Select a file with a broken reference.
  2. Click Tools > Update References . …
  3. Select a reference to replace and click Edit > Replace File.
  4. In the Replace File dialog box, browse to the file that will replace the broken reference.
  5. Click Open.

Can you scale parts in assembly solidworks?

In a part document, click Scale (Features toolbar) or Insert > Features > Scale . Set options in the PropertyManager. The geometry of the model increases or decreases in size according to the scaling factors and other options you set.

How do you cut parts out of a Solidworks assembly?

To create an assembly feature cut:

  1. Open a sketch on a face or plane, and sketch a profile of the cut. …
  2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
  3. Set the options as needed in the Extrude or Revolve PropertyManager.
IT IS INTERESTING:  Frequent question: How do I make an SVG icon?

How do you change parts in assembly in Inventor?

Edit a Part in an Assembly

  1. Right-click the part Clamp Sketch in the browser and select Edit from the pop-up context menu, or right-click the 2D sketch in the graphics window and select Edit Component from the marking menu. …
  2. Start the Extrude command.