How do you extrude a boss in Solidworks?

How do you extrude a boss?

The Extruded Boss/Base feature can be found on the features tab in the Command Manager interface as shown in Figure 1. You can also go to the toolbar and click Insert -> Boss/Base -> Extrude to pull up the Boss-Extrude Feature menu as well.

How do you extrude in Solidworks?

Click Extrude (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion. The Base-Extrude PropertyManager appears.

What is required to create a solid using the extruded boss or base tool?

Oftentimes when creating solid models, we need an extrusion to go a certain distance in one direction and a different distance in the other direction. In this case, we chose to go 20mm in Direction 1, which is up, and 7.5mm in Direction 2, which is down.

What is extruded boss base?

Oysu. Chapter 3 Extruded Boss and Cut. Extrude tool is used to extend a sketched profile in one or two directions as either a thin feature or a solid feature. An extrude operation can either add material to a part (in a base or boss) or remove material from a part. 3.1 Extruded Boss.

IT IS INTERESTING:  How do you make a 3D rectangle in AutoCAD?

How do you get rid of Boss Extrude in Solidworks?

This is useful in working with multibody parts with multiple configurations. To use Delete/Keep Body: Click Delete/Keep Solid/Surface on the Features toolbar, or click Insert > Features > Delete/Keep Body. In the PropertyManager, select Delete Bodies or Keep Bodies.

How do you draw on a boss extrude?

To start a sketch with an Extruded or Revolved Boss/Base:

  1. Click Extruded Boss/Base or Revolved Boss/Base. …
  2. Select one of the three planes (Front Plane, Top Plane, and Right Plane) displayed. …
  3. Create a sketch with the sketch entity tool, or select a tool on the Sketch toolbar and create a sketch.

How do you extrude a 3D sketch boss?

Extruding Surfaces from a 2D or 3D Face

  1. Click Insert > Surface > Extrude.
  2. Select a face: …
  3. Select other faces to define the extrude as required. …
  4. Select the end condition.
  5. For 3D faces, select a plane, edge, 2D face, or sketch line to define the direction of extrusion .

How do you extrude boss base?

Extrude PropertyManager

  1. Create a sketch.
  2. Click one of the extrude tools: Extruded Boss/Base. on the Features toolbar, or click Insert > Boss/Base > Extrude. Extruded Cut. on the Features toolbar, or click Insert > Cut > Extrude. Extruded Surface. on the Surfaces toolbar, or click Insert > Surface > Extrude.

How do you add a boss in Solidworks?

The mounting boss feature can be found under Insert> Fastening feature > Mounting Boss. The mounting boss command requires a face or 3D point on which to locate the geometry on. The procedure which I have found helpful is to select a face in the general position that you want the boss to go.

IT IS INTERESTING:  What does W D mean in floor plan?

How do you merge extrude bosses in Solidworks?

To add bodies together:

  1. Click Combine. (Features toolbar) or Insert > Features > Combine.
  2. In the PropertyManager, under Operation Type, select Add.
  3. For Bodies to Combine, select the bodies to combine. You can select bodies in the graphics area or the Solid Bodies. …
  4. Click Show Preview to preview the feature.
  5. Click .

How do you use extrude feature?

There are several ways to activate the Extrude tool:

  1. Click Model > Extrude and create a sketch to extrude. This method is referred to as action-object.
  2. Select an existing sketch and then click Model > Extrude. …
  3. Select a datum plane or planar surface to use as the sketching plane and then click Model > Extrude.

How do you show extrude dimensions in Solidworks?

In your FeatureManager Tree, right-click on the Annotations folder and select Show Feature Dimensions. This will make all the dimensions from the features appear around the part in the design space.

What is extrude feature in Solidworks?

The extrude tool is one tool that I believe every single person who has ever played with or used SOLIDWORKS knows. … Every extrusion defaults to being “From” the sketch plane you created the geometry on, but you can specify a basic offset parameter using a distance, vertex or different plane/face.